Piezoresistive Silicon Die Pressure Transmitter for Construction Machinery Industry

• Type: Piezoresistive Pressure Sensor
• Component: SemiConductor Type
• For: Diffused Silicon Pressure Transmitter
• Output Signal Type: Analog Type
• Production Process: Integration
• Material: Stainless Steel
• Model NO.: T383
• Wiring Type: Four-Wire
• Measuring Medium: Liquid
• IP Rating: IP68
• Certification: RoHS
• Customized: Customized
• Transport Package: Foam+Carton
• Specification: dia. 19mm
• Trademark: Runpaq
• Origin: China

Product Description

Piezoresistive Silicon Die Pressure transmitter for Construction Machinery Industry

T383 line is industrial pressure transmitter, featuring heat-resistance, wide range and high stability. The product is widely used for the measurements of gas and liquid, such as water, oil and light corrosive liquid and gas. Adopting 1Cr18Ni9Ti stainless steel construction and the professional V/I converting circuit, T383 line is easy for zero/span trim.
 

Application	Key features
• Construction Machinery • Automobile engines • High-pressure common-rail engine • Hot and Cold environment • Deep well hydraulic detection • Boiler pressure detection • Natural gas storage equipment • Hydraulic lubrication	• Pressure type: Gauge Pressure • Range: 0~5MPa~80MPa • Accuracy: ±0.5%F.S • Stability0.2%F.S/Year(typical), 0.4%F.S/Year(maximum) • Customized working temperature: -40ºC~150ºC • Signal Output:4~20mA, 1~5V, 0.5~4.5V • Power supply: 8/10~30Vdc, 5V(Ratio) • Sputter film sensor • OEM: Available

 
Wiring diagrams

Electric connect
Cable	two wires	three wires	Hirschmann	GX16-7
Red	power supply	power supply	1	1
Blue/Green	output	output	2	2
Black	shield	GND	3	3
Yellow	-	shield	GND	4
Signal output
Two wires	4~20mA
Three wires	0~5V, 0~10V, 1~5V, 0.5~4.5V,

Dimensions

Specification

Measure range	0~5MPa…80MPa	Insulation	>100MΩ@50V
Overload pressure	2 times of rated pressure	Electric strength	500V @60second
Burst pressure	10 times of rated pressure ±0.5/55ºC	Vibration/shock	10g/5~2000Hz, axes X/Y/Z20g sine 11ms
Accuracy	±0.5%F.S	Pressure type	GP
Stability	0.2%F.S/Y, 0.4%F.S/Ymax	Response time	10 mS
Work temp.	-40~150ºC;	Pressure durability	1 x 108 pressure cycle@25ºC
Compensate temp.	-20~120ºC	Safety level	Intrinsically Safe E; Explosion-proof D
Medium compatibility	All 1Cr18Ni9Ti-compatible corrosive mediums	EMC	EN50081-1/-2; EN50082-2
Electric parameter	two wires	three wires
Output signal	4~20mA	0~5Vdc		0~10Vdc
Power supply	10~30Vdc	8~30 Vdc/ac		5Vdc (Ratio)
Load	(U-10)/0.02(Ω)	> 100k Ω
Electric connect	DIN43650, IP65; GX 16-7, IP45; Wire jacket connection, IP68; Waterproof connection;
Pressure connect	M20 x 1.5, G1/4, G1/2, NPT1/2, R1/2

Notice:1MPa=10bar; 1bar≈14.5PSI; 1PSI=6.8965kPa; 1kgf/cm2=1atm; 1atm≈98kPa

Model selections