China Mini Motorized Ball Valve Motor Actuator With Gearbox 2NM
General Description:
The DC3.6V Motor Actuator has a gearbox and be powered by battery. It can can used for driving a shaft in a mini motorized ball valve for control the flow in pipe line. With proper gear reduction ratio and motor, its torque output is from 1.8NM minimally. The larger toqure can be achieved for driving bigger valve: DN15, DN20, DN25, DN32, DN40, DN50. Larger size ball valve can be supplied too. The gearbox of motor actuator is with metal gear, very sturdy design ensures the long service cycles more than 20000 times. Over years, we supplied to many brand water meter factories in China.
Applications: mini motorized ball valve, prepaid water meter, AMR water meter, ultrasonic water meter, heat meter, HVAC, zone valve, heat control valve, etc.
Technical data-Model K13
1. Voltage: DC3.6 V (Range: DC2.5 - 5 V, the higher the voltage, the larger torque, the shorter life span)
2. Current at empty run: <25 mA @ 3.6V, 23ºC
3. Current with loading: <550 mA (motor #320)
4. Torque: >1.8 NM
5. Open/close time: <10S
6. Velocity reduction ratio: 2000:1 (DN15-20)
7. Protection: IP66
Wiring diagram
Wire color |
Description |
Blue |
signal of switch on position, open valve |
White |
signal of public terminal |
Yellow |
signal of switch off position, close valve |
Red |
power terminal, + positive |
Black |
power terminal, - negative |
Factory overview
-Production facilities
Ware house